![\"\"](\"https://www.jinghuagongcheng.cc/d/file//p/2022/05-12/4c0f8504a6f17819aa1ab1416512b878.jpg\")
What are the specific requirements for purification workshops? There are many specific requirements for this type of workshop. For example, there are requirements for the cleanliness level of this sterile room, and different workshops require different levels of cleanliness. Therefore, the cleanliness level of this workshop needs to be determined according to the actual requirements of the products produced in the workshop. Another very important requirement is the temperature requirement, which is also very important. If the temperature inside the workshop is appropriate and slightly higher than the outside temperature, then air can flow from higher temperature areas to lower temperature areas. This can further ensure that the air in this space always flows outward, thereby ensuring the cleanliness and hygiene of the air inside the workshop. Below are some other requirements for this type of workshop.
![\"\"](\"https://www.jinghuagongcheng.cc/d/file//p/2022/05-12/6a0bfacd79d38a8454b93ec70d490298.jpg\")
For many production enterprises, using ordinary exhaust fans in clean rooms cannot discharge harmful gases into the room. Therefore, how to deal with these businesses has become a key issue for many production enterprise operators to consider, according to professionals. The dust-free and harmless air purification equipment in clean room decoration can filter 99% of harmful gases in the room, and the odor and filtration effect can reach over 100%. As for the effectiveness of using clean room air dust-free and harmless purification equipment, many production enterprise owners say that the purification effect of different indoor air dust-free and harmless purification equipment is completely different, and in the production process of operating these dust-free and harmless air purification equipment in the workshop, it is necessary for professionals to operate them, such as operating indoor air dust-free and harmless purification equipment.
Firstly, professional technicians introduce that all cleanroom air purification equipment sucks air into the compression chamber through the working unit, so it is best to install the air purification equipment in a well ventilated area. This is not only beneficial for more fresh air to be drawn into the purified air equipment, but also because the purified air equipment generates a lot of heat during operation, the surface temperature of the chassis often reaches a high level. Therefore, installing the purified air equipment in a ventilated place can also allow the clean room purified air equipment to receive better heat dissipation. Because the dust-free air purification equipment in clean rooms mainly relies on the operation of motors to generate high voltage and purify the air, only when the compression circuit is running normally can it generate relatively high and stable high voltage. In addition to these working circuits, indoor air dust-free and harmless purification equipment also has a good exhaust system.
And as long as users have used motors with higher power, they feel that the harmful gases produced in sterile rooms can be effectively reduced, which is the credit of dust-free air purification equipment. Some companies have also calculated that after using indoor air dust-free and harmless purification equipment, they not only meet the standards in the environmental protection testing and annual inspection of clean room decoration and production processes, but also do not need to use any other dust-free purification equipment for air purification in the workshop. As long as sterile indoor air purification equipment is used, attention should be paid to the working environment of the air purification equipment in the motor workshop to ensure that the temperature of the working environment is not too high
